User guide

MC Pro User Guide110
User Format
The User Format tab allows for custom bus-to-channel allocation to be defined for multi-channel monitoring. These mappings
are used for defining the format of Sources in the Source Setup section, and to define the input format of the Monitor Insert Re-
turn. User Formats may have a channel width up to 8 channels wide (7.1).
Select
Default pre-defined formats are: Mono, Stereo, LRCS, 5.1, 6.1, & 7.1
Four undefined User Formats are provided (User 1–4). To change a predefined or user format, select from the pop-up menu and
make desired changes.
Channels (in Selected Format)
This pop-up menu defines the number of channels used for the selected Format.
Change Name
All User defined formats may be renamed at anytime. User Format names appear in the Source Setup tab as well as the Monitor
Insert Return Format settings. To change the name of the currently selected format, type the desired name in the field and press
Apply.
Channel Selection
The Channel Selection settings are used to define the Formats bus-to-channel allocations.
Ch 1-8 refer to the SMP I/P’s (bus) of selected source. The pop-up selections refer to the channel destination (SMP O/P) that the
relative SMP I/P channel will be re-directed to.
User Format