User guide

MC Pro User Guide108
Main
The Main tab provides access to all the necessary features and parameters used for general operation.
The parameters of the Main tab may also be accessed using the Control Room section of the MC surface and the MC touchscreen.
Overview of Main
The Main tab controls the following:
Source Selection For Control Room, Monitor and Record feeds (SMP O/P’s).
Level, Dim and Cut For each feed.
Format
• Control Room and Record A feeds allow up to 7.1 multi-channel O/P formats to be selected.
• Monitor A, Monitor B and Record B are either Mono or Stereo.
• Folddown:
• Selecting an O/P format smaller than the Source I/P format will down-mix the channels based on the settings specified in
the Folddown Matrix.
• Sum, Inter-cancel and Auto Scale for each feed.
• Sum: this allows multiple Sources to be selected simultaneously.
• Inter-cancel: this allows for only one source selection to be made. Any previously selected sources will be deselected.
• Auto Scale: Used in conjunction with Sum, this keeps the combined output level scaled down to compensate for the
increased level of summed signals.
Main tab