User guide

MC Pro User Guide106
Talkback
SMP2 allows for four separate Talkbacks to be created, each with their own destinations and behavioral actions that determine
the affect on each of the Main SMP O/P feeds when enabled.
Currently, only Talkback 1 can be engaged from the MC Control Room surface.
Select
This chooses which of the 4 Talkbacks is being edited.
Level
This set the Level of the currently selected Talkback.
Change Name
This allows the name of the currently selected Talkback to be changed.
Source
This allows for any of the 4 Talkback Sources to be assigned as the source I/P of the currently selected Talkback.
Destination
Each Talkback source can be assigned to any of the Main SMP O/P feeds.
Action
When engaged, each Talkback can carry out various actions (Dim or Cut) on each of the Main SMP I/O feeds.
Select the action for each of the Main SMP O/P feeds using the pop-up selections for the currently selected Talkback source.
Talkback Source
Each pop-up menu allows any available Hardware I/P to be patched as a Talkback I/P source.
Talkback tab