User guide

Appendix A: Studio Monitor Pro 2 105
Source Setup
The Sources Setup tab allows for the creation of logical groupings of SMP I/P’s called Sources. It is recommended that the created
Sources correspond to the various Application O/P stems and/or External I/P sources as applicable to each individual system
configuration.
Using the Source Availability Selector, each Source can be explicitly enabled or disabled from each SMP O/P feed.
New Source
Name
Type in the name of the Source to be created.
Start Channel
This pop-up menu is used to assign the first SMP I/P bus used in the Source.
Format
This allocates the number of consecutive SMP I/P channels and determines the SMP O/P routing as specified in the User Formats
settings. Standard default formats such as Mono, Stereo, 5.1, 6.1, and 7.1 are available.
Source Information
After a Source is created, it will appear in this section. To delete a Source: select the Source to be deleted, and press the
Delete button.
Source Availability Selector
This allows for explicit enabling or disabling of any created Source to be routed to the Main SMP O/P feeds.
Enabled sources under each SMP O/P feed will be available in the Main tab as a Source Selection.
Sources Setup tab