User guide

MC Pro User Guide104
Hardware I/P Patch
The Hardware I/P Patching tab is used to configure the destination of any enabled Hardware I/P’s to SMP I/P busses or directly to
the Application I/P’s (EuIn).
The left-most column displays all Hardware I/P sources enabled in the Configuration tab.
SMP2 allows for two separate SMP I/P patch configurations: A/B (selectable from the Main tab). Additionally, the column labeled
Application I/P allows for Direct I/P patching (EuIn 1-98).
To route a source, simply click on the patch cell and select from the pop-up menu of available destinations.
Monitor Insert Return paths can be assigned from here and will show up as an available destination.
Hardware I/P Patch tab