User guide

Appendix A: Studio Monitor Pro 2 103
Application O/P Patch
This tab is used to patch the outputs of your software application to SMP I/P busses or directly to Hardware O/P’s.
SMP allows up to 128 source O/P’s (EuOut) from any software application. These are displayed on the left. Two separate SMP I/P
patch configurations are permitted: A/B (selectable from the Main tab). Additionally, the column labeled Hardware O/P allows for
Direct O/P patching.
To route a source, simply click on the patch cell and select from the pop-up menu of available destinations.
Monitor Insert Return paths can be assigned from here and will show up as an available destination.
Application O/P Patch tab