User guide

MC Pro User Guide102
The DIM level is adjustable from the MC Control Room surface section.
To adjust DIM level:
1 Press the DIM button
2 Turn the CR knob to adjust the amount of attenuation.
Fixed Level
This slider sets the fixed output level, enabled from the Main tab for the Main Control Room output. This is a useful setting for
systems requiring specific monitoring levels such as SDDS mixing environments.
I/O Patching
The routing of signals between hardware, software applications and SMP I/O (input/output) busses is handled in three separate
tabs: SME O/P Patch, Application I/P Patch, and Hardware I/P Patch. Additionally these same tabs allow Monitor Insert Send and
Return patches to be configured.
SMP O/P Patching
This tab is used to setup your O/P (output) patching for speaker, monitor and record paths as well as Insert Sends.
The left side displays all available SMP O/P sources. This includes Main Control Room (7.1), Alt 1, Alt 2, Monitor A, Monitor B,
Record A (7.1) and Record B feeds. Monitor Insert Sends are also routed from this tab.
SMP O/P sources can be routed to any available Hardware O/P and/or Application I/P (EuIn 1-98) destination. To route a source,
simply click on the patch cell and select from the pop-up menu of available destinations.
SMP O/P Patch tab