User guide

MC Mix User Guide30
Wheel Sensitivity Sliders
The sensitivity of the Jog Wheel and Shuttle Ring can be precisely adjusted using the Wheel Sensitivity sliders. The top two sliders
pertain to MC Transport, the bottom is the Jog Wheel for MC Control.
The center position is the default for each control. Click and drag a slider to move it right for faster response or left for a slower,
more controlled movement. Click the Reset button to restore the center position.
Preferences
Footswitch
MC Mix lets you connect a footswitch for hands-free punch in/out. Connect a footswtich to the 1/4-inch FOOTSWITCH input
on the back panel.
To configure the Footswitch in EuControl:
 In the Footswitch section of the Preferences tab, click to select the desired Punch In and Punch Out assignments:
Record | Record When the application is rolling, pressing the footswitch once punches into recording on record enabled tracks.
Pressing the footswitch again takes the track(s) out of record but does not stop the transport.
Record | Play Pressing the footswitch once punches into recording on record enabled tracks. Pressing the footswitch again stops
the record pass (your DAW may or may not automatically take the track out of record on stop; see the documentation for your
application).
Status Shows whether the footswitch state is currently on or off.
Shift + Fader Sets Level to 0dB
When enabled, holding SHIFT and touching a fader sets the fader to 0dB. SHIFT-lock does not apply (SHIFT must be pressed).
MC Control Display
This feature only applies to MC Control. See the MC Control User Guide.
Preferences tab