User guide

MC Mix User Guide6
Attaching an MC Mix to Additional Units
Up to four MC Mixes can be physically attached to each other to form a larger and more stable control surface. An MC Control
and MC Transport can also be joined to MC Mix.
To join two MC Mixes (or other Artist Series unit):
1 On one of the MC Mixes, use a #2 Phillips screwdriver to remove the two silver screws. The screws may be tight, so you may
have to use some force.
2 Lift the black plastic connecting part and side panel up and out of the MC Mix.
3 On the second MC Mix, remove the side panel on the end where it will attach to the first MC Mix.
4 Slide the connecting part of the second MC Mix into the first MC Mix to attach them together.
If you are using multiple units, see “Surfaces” on page 26 to use EuControl to link the units in the desired order.
Removing screws from the bottom panel
Removing connecting part and side panel
MC Mixes attached by connecting at side panel