User guide

Chapter 4: Making Studio Connections 13
Chapter 4: Making Studio Connections
This chapter provides step-by-step instructions for
connecting mics, instruments, mixers, head-
phones, speakers, and other devices to Mbox Pro.
Connecting Outputs
To hear audio from Mbox Pro, you will need to
connect headphones or an external sound system
(such as powered monitors or a home stereo) to
Mbox Pro.
Connecting Headphones
You can use headphones equipped with a 1/4-inch
stereo jack to monitor your audio.
To connect headphones:
1 Connect headphones with a 1/4-inch stereo con-
nector (or adapter) to the Headphone outputs A
or B.
2 Adjust the volume using the corresponding
Headphone Volume knob on the front panel.
By default, Headphone output A mirrors Monitor
output channels 1–2.
Headphone jacks and controls on front of Mbox Pro
1/4-inch
Headphone outputs (A, B)
Headphone level (A, B)
You can create independent stereo mixes for
each headphone output in the Driver Control
Panel. See “Stereo Mix Section” on page 32.
Do not use the front panel headphone outputs
for anything but headphones. If you use a
headphone distribution amp or cue system,
use any of the six Monitor outputs on the back
panel. See “Monitor Outputs 1–6” on
page 14.