User guide

Chapter 5: Using the Driver Control Panel 39
Swap Button Swaps the stereo image, making the
left channel play out the Right output, and the
right channel play out the Left output.
Link Button Links the FX Returns section and the
mute buttons.
Master Meters Lets you have a visual representa-
tion of the audio signal being fed to the associ-
ated hardware output pair.
Stereo Mix Copy Lets you copy the settings of the
current stereo mix to one of the other stereo
mixes.
Mono Button The Mono button is available only
under the following circumstances:
• At least one output pair is assigned as a con-
trol room output pair.
• The currently displayed stereo mix is the
stereo mix used by the current control
room output pair.
Status Indicators
Along the bottom-left of the Driver Control
Panel are the following status indicators:
Hardware Connected
This tells you the status of the hardware; if a
properly installed, powered-on Mbox Pro is con-
nected to the computer.
Streaming
This indicates if audio from a Digital Audio
Workstation or a media player (such as Pro Tools
or Windows Media Player) is currently stream-
ing audio to the Mbox Pro.
Host Control Enabled
If an application such as Pro Tools has control
over the Driver Control Panel, then “Host Con-
trol Enabled” displays.
Status indicators