User guide

Mbox User Guide26
Setup
Click Setup to access the General Setup and Out-
put Setup dialogs. You can toggle between dia-
logs by clicking General Setup or Output Setup.
Configure Mbox Pro hardware settings in Gen-
eral Setup. For example, you can set buffer size,
sample rate, and clock source. You can also de-
fine how Mbox Pro functions when it’s con-
nected to a computer or when it’s in standalone
mode (not connected to a computer).
Configure your monitoring and output settings
in Output Setup. For example, you can config-
ure up to three stereo hardware output pairs to
function as control room outputs, which are
then selectable using Mbox Pro’s Speaker button
(front panel). You can also configure the Master
Volume knob to function as the master volume
control for all six outputs simultaneously, pro-
viding a 5.1 surround monitor master volume
control.
General Setup
General Setup options are grouped in the fol-
lowing categories:
• Hardware Settings
• Soft Button Settings
• High-Pass Filter Options
• Standalone Settings
Setup pop-up menu, General Setup mode shown