User guide

Chapter 4: Making Studio Connections 13
chapter 4
Making Studio Connections
This chapter provides step-by-step instructions
for connecting mics, instruments, mixers, head-
phones, speakers, and other devices to
Mbox Pro.
Connecting Outputs
To hear audio from Mbox Pro, you will need to
connect headphones or an external sound sys-
tem (such as powered monitors or a home ste-
reo) to Mbox Pro.
Connecting Headphones
You can use headphones equipped with a 1/4-
inch stereo jack to monitor your audio.
To connect headphones:
1 Connect headphones with a 1/4-inch stereo
connector (or adapter) to the Headphone out-
puts A or B.
2 Adjust the volume using the corresponding
Headphone Volume knob on the front panel.
By default, Headphone output A mirrors Moni-
tor output channels 1–2.
Headphone jacks and controls on front of Mbox Pro
1/4-inch
Headphone outputs (A, B)
Headphone level (A, B)
You can create independent stereo mixes for
each headphone output in the Driver Control
Panel. See “Stereo Mix Section” on page 34.
Do not use the front panel headphone out-
puts for anything but headphones. If you
use a headphone distribution amp or cue
system, use any of the six Monitor outputs
on the back panel. See “Monitor Outputs
1–6” on page 14.