Specifications

Pro Tools Unity ISIS Guide72
4 Use the controls underneath the Source Mon-
itor to locate the first frame of the portion of the
clip that you want to edit into the sequence:
• To begin playing the clip, click Play (or
press the Spacebar). Click Play or press the
Spacebar again to Pause.
• To move to the beginning of the clip, click
Rewind (or press the Home key).
• To move to the end of the clip, click Fast-
Forward (or press the End key).
• To nudge by frame, click Step Forward 1
Frame or Step Backward 1 Frame (or press
the Left/Right Arrow keys).
• To scrub, click and drag the cursor beneath
the Source Monitor. (Enable the Caps Lock
to hear audio while scrubbing.)
5 Click Mark In to mark the In point (the first
frame of the selected portion) at the current po-
sition of the cursor.
6 Using the same controls, locate the last frame
of the portion of the source that you want to
edit into the sequence.
7 Click Mark Out to mark the Out point (the last
frame of the selected portion) at the current po-
sition of the cursor.
The portion of the audio source between the In
point and the Out point is now selected for ed-
iting into the sequence.
8 Choose Clip > New Audio Track to add audio
tracks to the sequence. (This leaves any original
audio tracks in place to compare synchroniza-
tion.) Add a new track for each channel of audio
you want to add.
Source Monitor controls
Enable the Caps Lock to hear audio while
scrubbing.
Rewind
Fast-
Forward
Step Forward 1
Frame
Cursor
Play/
Pause
Step Backward 1
Frame
Mark
Out
Mark
In
Clear Both
Marks
Mark
Clip
You can also select the entire source clip or
sequence by clicking Mark Clip.
You can also click the Clear Both Marks
button to clear the In and Out points.
Audio tracks in the Timeline
Existing
audio
tracks
New audio
tracks