Specifications

Chapter 2: Configuring a Workstation as an ISIS Client 11
chapter 2
Configuring a Workstation as an ISIS Client
This chapter describes how to install and config-
ure an individual Pro Tools or Media Station|PT
workstation as a client of an Avid Unity ISIS sys-
tem.
Installation Overview
Installing the hardware and software involves
the following process:
1 Make sure the software (Media Station|PT or
Pro Tools) is installed on the workstation.
2 Install the ISIS client hardware.
3 Configure the Windows XP Firewall.
4 Install the ISIS client software for Zone 1 or
Zone 2 clients.
Workstation Configuration
Requirements
Before configuring a workstation as a client of
an ISIS system, obtain from your Unity adminis-
trator (and make a note of) the following param-
eters for the ISIS system to which you are con-
necting your clients:
•IP address
•Subnet Mask
•Default Gateway
Installing Media Station|PT or
Pro Tools
If you are configuring a Media Station|PT work-
station as an ISIS client, ensure that
Media Station|PT and any optional hardware
(such as Avid video peripherals) have been prop-
erly installed. For detailed information, see the
Media Station|PT Guide.
If you are configuring a Pro Tools workstation as
an ISIS client, ensure that Pro Tools hardware
and software are properly installed. For detailed
information, see the Pro Tools HD Getting Started
Guide.