Product specifications

Configuring the Notification Service
32
The changes for the configuration will be lost.
Configuring Error Notification Parameters
The Filters area of the Notification Service tool window allows you to specify the type of error message that triggers
an email notification and to set parameters for each type of error message—Error, Warning, and Information
messages.
You can configure the ISIS to send notification emails for one or more error types and what severity level on which
to be notified.
For a complete list of Avid ISIS email notifications, see
“Avid ISIS E-mail Notification List” on page 173.
To configure error notification parameters:
1. In the Filters section, select or deselect individual notifications by clicking the check boxes corresponding to the
error notification.
2. Click Save.
The settings are saved, and a confirmation message is displayed in the Results area.
Configuring Contact Information
You must specify the contact information for all the people you want to receive ISIS notification emails.
To add contacts:
1. In the Contacts section, click New.
Empty User Name and Email fields open.
2. Type a user name into the first text box.
This can be any name you want to assign to the user.
3. Type a valid email address into the second text box.
4. Click Save.
5. Repeat steps 1 – 4 to add more email contacts, if needed.
To remove a contact:
1. Click Delete next to the email contact entry.
The contact is removed from the list.
2. Click Save.