Product specifications

Creating an EtherChannel (Link Aggregation)
84
n
Mode on is the simplest of aggregation methods and with the least features, this variant of link aggregation is used
by ISIS.
interface Port-channel10
switchport
switchport access vlan 10
switchport mode access
no ip address
interface TenGigabitEthernet1/1
description v10 ISIS echannel
switchport
switchport access vlan 10
switchport mode access
no ip address
channel-group 10 mode on
interface TenGigabitEthernet1/2
description v10 ISIS echannel
switchport
switchport access vlan 10
switchport mode access
no ip address
channel-group 10 mode on
Additional information:
• In the previous example, Channel-group 10 was used. Make the proper channel group assignment for your
site.
• The Cisco 6509 defaults to using a “source/destination” IP load balancing algorithm, which is required by
Avid. This should not have to be changed.
To verify the current load-balancing algorithm use the following command on the 6509 console:
Cisco 6509 # show etherchannel load-balance
EtherChannel Load-Balancing Configuration:
src-dst-ip
mpls label-ip