Product specifications

Customize the Uplink on the Dell Networking Switch
70
7. Hostname(config)# exit
8. Hostname# write
To add multiple 1 Gb ports associated with a VLAN:
1. Hostname# configure
1. hostname(config)# interface range gigabitethernet 1/0/1-24
2. Hostname(config-if-Gi1/0/1)# switchport mode access
3. Hostname(config-if-Gi1/0/1)# switchport access vlan 10
4. Hostname(config-if-Gi1/0/1)# spanning-tree portfast
5. Hostname(config-if-Gi1/0/1)# no shutdown
6. Hostname(config-if-Gi1/0/1)# exit
7. Hostname(config)# exit
8. Hostname# write
To add one 10 Gb port associated with a VLAN:
1. Hostname# configure
1. hostname(config)# interface tengigabitethernet 1/0/1
2. Hostname(config-if-Te1/0/1)# switchport mode access
3. Hostname(config-if-Te1/0/1)# switchport access vlan 10
4. Hostname(config-if-Te1/0/1)# spanning-tree portfast
5. Hostname(config-if-Te1/0/1)# no shutdown
6. Hostname(config-if-Te1/0/1)# exit
7. Hostname(config)# exit
8. Hostname# write
To add multiple 10 Gb ports associated with a VLAN:
1. Hostname# configure
1. hostname(config)# interface range tengigabitethernet 1/0/1-2
2. Hostname(config-if)# switchport mode access
3. Hostname(config-if)# switchport access vlan 10
4. Hostname(config-if)# spanning-tree portfast
5. Hostname(config-if)# no shutdown
6. Hostname(config-if)# exit
7. Hostname(config)# exit
8. Hostname# write
Creating a Link Aggregation (Port Channel—N3024/N3048 switches)
To creating a link aggregation:
1. Use your terminal emulation or telnet into switch.
2. hostname#
configure