Product specifications

Restoring the Avid Dell Networking Configuration
64
9. Type exit .
10. Type
exit .
11. Type
wr mem .
12. Type
exit .
To confirm the setting change, look for the “Flowcontrol rx on tx on” entry:
1. Type en .
2. You are prompted for a password, type
avid .
3. Type
sho int tengigabitethernet 0/25 (port number depends on optional modules).
Information similar to the following should display, verify “Flowcontrol rx on tx on” is included in the
configuration:
TenGigabitEthernet 0/25 is up, line protocol is up
Hardware is Dell NetworkingEth, address is 00:01:e8:d6:84:7b
Current address is 00:01:e8:d6:84:7b
Pluggable media present, XFP type is 10GBASE-SR
Medium is MultiRate, Wavelength is 850.00nm
XFP receive power reading is -4.0994dBm
Interface index is 40436228
Internet address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed 10000 Mbit
Flowcontrol rx on tx on
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 4w5d1h
Queueing strategy: fifo
Input Statistics:
4372398864 packets, 5575634120385 bytes
645279553 64-byte pkts, 15320069 over 64-byte pkts, 30588757 over 127-byte pkts
7206136 over 255-byte pkts, 59117205 over 511-byte pkts, 3614887144 over 10
23-byte pkts
693485 Multicasts, 34501 Broadcasts
0 runts, 0 giants, 682022 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
8393098546 packets, 12349453356270 bytes, 0 underruns
155227351 64-byte pkts, 26414194 over 64-byte pkts, 54970467 over 127-byte pkts
47132113 over 255-byte pkts, 8010284 over 511-byte pkts, 8101344137 over 10
23-byte pkts
151510 Multicasts, 283941 Broadcasts, 8392663095 Unicasts
0 throttles, 0 discarded, 0 collisions