Product specifications

Restoring the Avid Dell Networking Configuration
59
Dell Networking S25 Switch — Console Port
- The Dell Networking S4810 switch uses a custom RJ-45 port on the right side of the switch.
- The Dell Networking S60 switch ships with a USB adapter that plugs into a console port on the right rear
of the switch.
Dell Networking S60 Switch — Console Port
2. Connect the other end of the Ethernet cable to the RJ-45 to DB-9 adapter (included with the switch) and plug
the DB-9 adapter into the serial port on your laptop (or computer).
3. Start your terminal emulation program.
4. Follow your the on screen instructions selecting a COM port with the following settings for your serial
connection.
n
In most systems, the serial port uses COM1.
Restoring the Avid Dell Networking Configuration
Access the Dell Networking switch console as previously described either through a serial or Telnet (management
IP address) connection, and do the following.
arm
D
23
24
21
22
STA
CK ID
USB console port
Option Setting
Bits per second 9600
Data Bits 8
Parity None
Stop Bits 1
Flow Control None