Product specifications

Dell Networking N3024 and N3048 Switch Modules
49
Dell Networking N3024 Switch — Front
Dell Networking N3048 Switch — Front
Dell Networking N3024 and N3048 Switch — Back
10 Gb Ethernet N3024 and N3048 Switch Connections
If you need to connect more than two 10 Gb connections, you can add an optional 2-port, 10 Gb module to the
N3024/N3048 switches. See
“Stacking the Dell Networking N3024 or N3048 Switches” on page 50.
To connect the Avid ISIS | 5500 to a 10 Gb Ethernet port on the switch:
1. (If connected) Remove both power cords from the back of the switch.
2. Remove the left blank faceplate cover on the back of the switch by removing the two screws that secure the
cover to the switch.
3. Insert the 10 Gb Ethernet module into the open slot where the blank cover was removed.
4. Secure the module in the switch with the two captive thumb screws.
5. Repeat steps 2, 3, and 4 if installing a second 10 Gb module in the right side slot on the switch.
6. Insert an SFP+ transceiver into an open connector on the 10 Gb Ethernet port in the switch (see
“Dell
Networking N3024 Switch — Front” on page 49
or “Dell Networking N3048 Switch — Front” on page 49).
7. Insert an SFP+ transceiver into the 10 Gb Ethernet connector in the Avid ISIS system.