Product specifications

Qualified and Approved ISIS Switches
16
Cisco Catalyst 4900M Rommon: 12.2(44r)SG (and later
a
)
IOS: 12.2 (46)SG (and later
a
)
40 1 Gb (RJ-45), WS-X4920-GB-RJ45
or
8 10 Gb (X2/SC)WS-X4904-10GE
8 10 Gb (X2/SC)
Cisco Catalyst 4500-X ROM: 15.0(1R)SG6 (and later
a
)
IOS: 03.04.02.SG (and later
a
)
32 dual-speed 1/10Gb ports (SFP+)
Cisco Catalyst C4948E Rommon: 12.2(44r)SG8 (and later
a
)
IOS: 12.2 (54)SG (and later
a
)
48 1 Gb (RJ-45),
four 10 Gb (SFP+/LC)
Cisco Catalyst 4948-10GE Rommon: 12.2(31r)SGA (and later
a
)
IOS: 12.2 (25) EWA8 (and later
a
)
48 1 Gb (RJ-45),
two 10 Gb (X2/SC)
Cisco Nexus 6500-E Series Supervisor:
WS-SUP720/WS-F6K-PFC3B
WS-X6704-10GE/ WS-F6700-CFC
WS-X6708-10GE/WS-F6700-DFC3CXL
Due to limited buffering, the following blades
only supports direct connected clients and do
not support uplinks to additional switches.
Supervisor:
WS-X6748-GE-TX/WS-F6700-CFC/DFC
WS-X6748-SFP/WS-F6700-CFC/DFC
Cisco Nexus 7000 Series BIOS 3.19.0 (and later
a
)
Kickstart 4.2(4) (and later
a
)
System 4.2(4) (and later
a
)
CMP BIOS 02.01.05 (and later
a
)
CMP Image 4.2(1) (and later
a
)
48 1 Gb module (copper) N7K-M148GT-11
32 10 Gb module (optical) N7K-M132XP-12
(only 8 supported running simultaneously due
to 4 to 1 over-subscription)
N7K-M108x2
48 port 10 Gb/1 Gb module (optical)
N7K-F248XP-25E
24 port 10 Gb module (optical)
N7K-M224XP-23L
48 port 1 Gb copper N25-C2248TP-E-1GE
Dell Networking
(ISIS | 5500 and ISIS
| 2500 only)
N3024 6.0.0.7 and later 24 1 Gb (RJ-45),
2 10 Gb SFP+ ports
1 slot for 2-port 10 Gb SFP+ module
Dell Networking
(ISIS | 5500 and ISIS
| 2500 only)
N3048 6.0.0.7 and later 48 1 Gb (RJ-45),
2 10 Gb SFP+ ports
1 slot for 2-port 10 Gb SFP+ module
Dell Networking
(ISIS | 5500 and ISIS
| 2500 only)
S25N FTOS 8.3.1.1 (and later
a
) 24 1 Gb (RJ-45),
two slots for 10 Gb XFP modules (XFP/LC)
Minimum Supported Switch Firmware and IOS Versions (Continued)
Manufacturer Model Firmware/IOS
a
Description and
Approved Blades