Specifications

HDx TDM Option Guide6
7 Gently slide the card into the expansion slot. Make sure it is
oriented right-side up.
8 Secure the HDx to the back of the Mix Rack using the screws
that secured the expansion slot cover.
9 Inside the Mix Rack, secure the HDx card to the Mix Rack’s
chassis by tightening the captive thumbscrews.
10 Cut the zip tie that secures the expansion card power cable
to the chassis, being careful not to cut the wires.
11 Attach an available internal power cable plug to the power
socket on the HDx card by holding the socket on the HDx and
pushing the plug firmly into the socket. When the power ca-
ble plug is correctly attached to the HDx card, the yellow wire
should be the first wire from the left.
Installing the HDx card in the back of the Mix Rack
Securing the HDx card to the Mix Rack’s chassis
Cutting the expansion card power cable zip tie
Attaching an internal power cable plug