Installation guide

HDX Card Installation Guide30
HW Setup Button
The HW Setup button opens the Hardware Setup
dialog for your Avid hardware. The
HW Setup
button is only available when no clients are us-
ing the Avid Core Audio Driver.
To configure Core Audio HW Setup:
1 Quit any Core Audio client applications.
2 Double-click the Avid Core Audio Manager file
(located in /Applications/Avid/).
3 Click the HW Setup button to open the Hard-
ware Setup dialog.
4 Configure the Hardware Setup dialog for your
Avid audio hardware. If you have more than one
HDX card in your system, be sure to select and
configure only the audio interfaces connected to
the first HDX card.
5 When you are finished, click OK to close the
Hardware Setup dialog.
Prefs Button
The Prefs button opens the Avid Core Audio
Manager Preferences dialog. There are several
options available configuring the Manager ap-
plication. When finished setting these options,
click
OK to close the Avid Core Audio Manager
Preferences window.
Hide Manager if Auto-Launched by Client En-
able this option to hide the Manager panel after
the first client application accesses the Avid
Core Audio Driver. To open the Manager panel,
click on the Avid Core Audio Manager applica-
tion icon in the Dock.
Auto-Quit Manager when Last Client Quits En-
able this option to make the Manager applica-
tion quit when there are no longer any clients
using the Avid Core Audio Driver.
Use C|24 Stereo Routing (L/R to 1/3) When us-
ing C|24, enable this option to configure the
Avid Core Audio Driver to output through the
C|24 standard stereo routing (outputs 1 and 3).
Use XMON Stereo Routing (L/R to 1/5) When us-
ing D-Control or D-Command, enable this op-
tion to configure the Avid Core Audio Driver to
output through the D-Control or D-Command
standard stereo routing (outputs 1 and 5).
Hardware Setup dialog, HD I/O shown
For more information on the Hardware Setup
dialog, refer to the Pro Tools Reference
Guide.
CoreAudio Manager Preferences