Specifications

Chapter 5: Making Studio Connections 63
SYNC I/O integrates into the Loop Sync config-
uration of a Pro Tools|HD system, offering ex-
tremely fast lockup, near-sample accurate syn-
chronization, and an exceptionally low-jitter
clock. These features provide professional per-
formance and maximum audio fidelity under a
wide range of synchronization conditions.
For more information, refer to the SYNC I/O
Guide.
Connecting Ethernet Control
Surfaces
If you are using a built-in Ethernet port or a PCI
or PCIe Ethernet card to connect your computer
directly (rather than across a network) to a D-
Control, D-Command, ProControl or Con-
trol|24, the TCP/IP address must be set manu-
ally. The default manual settings will work in
most cases. Do not use DHCP unless your com-
puter is connected to a network that provides
DHCP services.