Specifications

Chapter 2: FT730 Features 5

1. TCC IN/Out (DB15)

• Connect TCC IN to TCC control port at local unit.

• Connect TCC OUT to TCC control port at remote unit.

Because the same unit is used at both ends, each has a TCC IN

and a TCC OUT connector. However, only the TCC IN is in-

tended to be used at the local end and the TCC OUT at the re-

mote end.

2. FIBER SYNC/TCC TX/RX (ST Optical Connector)

Connects local and remote units. Connect local RX and TX to

remote TX and RX, respectively. Both connections are re-

quired for proper operation.

3. FIBER MADI TX/RX (ST Optical Connector)

Connects local and remote units. Connect local RX and TX to

remote TX and RX, respectively. A single connection can be

used if MADI signals are only required for one direction.

4. MADI IN (BNC)

MADI connection for signal being transmitted over fiber.

5. MADI OUT (BNC)

MADI connection for signal being received from fiber.

Internal sync input jumper

BNCBNC XLRXLR

Back panel TCC, MADI, and fiber connectors

2435