User guide

KeylightThe Foundry
TUTORIAL
51
Tutorial 6: Garbage Masks
4. Add a Matte node and pipe the output into the Outside Mask input of
Keylight 2. Edit the Matte shape to garbage out the lighting rig.
Figure 94. Screen Shot showing yellow garbage shape from a Matte node.
5. In Keylight, pick the green screen colour.
6. In the Outside PPG set the Outside Mask to Use Luminance to remove the
lighting rig as shown in
Figure 96. That’s it!
Figure 95. Green Screen. Figure 96. Composite with lighting rig
removed.