Specifications

Chapter 2: New and Changed Features in S6 Software v1.4 5
Output Assignment
To assign track output using the Master Module:
1 Attention a track to bring it to the Attention Track knobs.
2 Navigate to the Home screen and tap to select Bus in the Function scroller. The upper left knob displays the current output as-
signment.
3 Do any of the following:
• To exit without changing the current assignment, tap to select any other Function.
• To select a different output, press the knob showing the current assignment. The top two knobs show available interface and
bus outputs. Rotate the corresponding knob until the desired output is displayed, then press the
In switch for that knob. This
assigns the selected output as the only output (removes any other assignments).
• To assign an additional output to the track, rotate the corresponding knob until the desired output is displayed and press the
Sel switch for the corresponding knob. This results in multiple output assignments (as indicated by the yellow Sel LED light-
ing, and on-screen in Pro Tools with a “+” in the Output assignment selector).
• To return to the previous page of choices, press the Master Module
Back switch ( ).
To assign track output from a channel strip:
1 In the strip for the desired track, press Bus on the Process module. The top-most encoder in the Knob Module shows the current
output assignment for the track (if no Knob Module is present for that strip, the current assignment appears in the Process Mod-
ule encoder display).
2 Do any of the following:
• To exit without changing the current assignment, press any other Function switch.
• To select a different output, press the knob showing the current assignment. The top two knobs show available interface or bus
outputs. Rotate the corresponding knob until the desired output is displayed, then press the
In switch for that knob. This as-
signs the selected output as the only output (removes any other assignments).
• To assign an additional output to the track, rotate the corresponding knob until the desired output is displayed and press the
Sel switch on the corresponding knob. This results in multiple output assignments (as indicated by the yellow Sel LED light-
ing, and on-screen in Pro Tools with a “+” in the Output assignment selector).
• To return to the previous page of choices, press
Back.
Navigating Through Multiple Output Assignments
When there are multiple outputs assigned to a track, you can quickly navigate through assignments by pressing the corresponding
knob top. For example, if multiple Bus outputs are assigned to a track you can press the Bus knob to cycle through each currently
assigned Bus output to quickly re-assign or silence it (set it to
no output).