Specifications

Chapter 2: New and Changed Features in S6 Software v1.4 10
Backup Function and Knob Page Settings
These settings let you define a default function view and knob focus to display whenever you attention a track that does not contain
the same function as the previously attentioned track.
To configure backup function and knob page view settings:
1 Navigate to the Home screen and tap the Local Options (gear) icon.
2 Tap to display the first (left-most) drop down menu for Backup Function and Knob Page Selected on Attention Change.
• To have the Home screen stay focused on whichever function was most recently edited, choose
Last Selected.
• To specify a function, select a function such as Pan, Bus, EQ, or Dynamics from the drop down menu.
3 To specify a knob page to be automatically focused when that function is displayed, tap to select a page from the second
(right-most) drop down menu.
• To have the Attention Track knobs maintain their previous focus, choose
Last Selected.
• To specify a page of knobs to be focused, choose a page (such as 1st, 2nd, and so on).
Auto Show Function Graph on Knob Touch
When set to any value other than 0 secs (Off), adjusting a control for any function that has a graph display (such as EQ or pan) au-
tomatically displays the graph in the Home screen. The graph stays on-screen after you let go of the knob for the length of time
specified in the
Auto Show Function Graph on Knob Touch slider (between 0.0 and 5.0 seconds).
Page Switches on the Master Module
You can use switches on the Master Module to page functions and focus the touchscreen knobs on different parameters. When the
Master Module
Shift switch is held down, the four switches at the bottom left and right of the touchscreen enter Page mode as in-
dicated by their LEDs lighting purple.
When in Page mode, the
Home and Swap switches page the Left knobs to their previous or next pages, and the Back ( )and
Config switches page Right knobs. A focused knob group can page even if the knobs are locked.
If both sides of the touchscreen are showing knobs from the same function, each set of
Page switches page both knob groups. If a
different function is focused on each side of the touchscreen, the
Page switches operate separately on each side.
Figure 8. Shift and Page switches on the Master Module
Setup
Setup
Setup
ConfigSwapHome
In
Sel
Config
In
Sel
In
Sel
In
Sel
In
Sel
In
Sel
In
Sel
In
Sel
In
Sel
Layout
Mode
Clear
Solo
Clear
Clip
WS
All
Tracks Type Flip
L Spill R Spill
Display 2
Display 1
Settings
Alt 1
Spkrs
Mon
Insert
Alt 2
Spkrs
Main
Spkrs
Dim Cut
Talk
Coms
Mon B
Mon A
Mixer Close
EndHome
Shift