Specifications

Chapter 2: New and Changed Features in S6 Software v1.4 8
Show Home Screen on Strip Attention
When enabled, the Touchscreen displays the Home screen when any strip is Attentioned by pressing its Attention Key on a Fader
or Automation Module.
Show Track Number
When enabled, strip OLEDs show the track number assigned by the parent DAW to the left of the Track name.
Show Momentary Fader Values
When enabled, values temporarily replace track name on Fader Modules when the fader is touched or adjusted. The length of time
values are displayed is determined by the Momentary Control Value Delay setting.
Momentary Control Value Delay
Values temporarily replace track name (on Fader Modules) and parameter names (on Display Modules in any Function view) when
controls are touched or adjusted. The
Momentary Control Value Delay settings lets you specify how long values are displayed.
Knobs
Send/Insert/Input/Bus Knobs Reversed
The Send/Insert Knobs Reversed setting introduced in S6 software v1.3 has been enhanced to also control how Input and Bus knobs
appear on Knob modules.
Reverse Function Pages for 5-Knob Strips
This new setting lets you configure Knob Module function views to display parameters in their default order, or “reversed” from
their factory mapping. For example, enable
Reverse Function Pages for 5-Knob Strips to have EQ plug-in parameters start with low
frequency parameters instead of high (or the opposite, depending on the default mapping of that plug-in).
Display Module Settings
In the Display Module section of Settings > Preferences, choices for Display Module layout are now provided in a menu. Tap the
Layout field to select a view for all Display Modules.
You can also specify a default function view and knob focus for the Home screen when a track is attentioned. See “Function and
Knob Page Settings” on page 9 for more information.
For Fader Module displays to follow the Momentary Control Value Display, make sure to enable Show Momentary Fader Values.
To set the display time for function graphs on the Home screen, see “Auto Show Function Graph on Knob Touch” on page 10.
Figure 4. Settings > Preferences, Knobs section
Figure 5. Settings > Preferences, Display Module