Product specifications

?
Uninstalling Avid|DS
Installation & Administration Guide • 23
Uninstalling Avid|DS
When you first receive your Avid|DS workstation, all the software you need to
run Avid|DS is already installed and tested. You should follow the instructions
in this chapter only if you are reinstalling or upgrading Avid|DS.
Removing Plug-ins Before removing the Avid|DS software, you must first remove any plug-ins
that were installed on your system. This procedure varies slightly depending
on whether you’re using the Windows 2000 or Windows NT operating system.
To remove plug-ins on Windows 2000 workstations
1. Go to Start > Settings > Control Panel > Add/Remove Programs.
2. Click Change or Remove Programs.
3. In the Currently Installed Programs list, check for any installed plug-ins.
4. Select the plug-ins installed on your system (one at a time) and click
Change/Remove. Repeat this step until they’re all removed.
5. Remove all Avid|DS native plug-ins:
• Dual Audio Channel Switcher
• Tone Generator
As of version 4.0, you can install multiple versions of Avid|DS on
your workstation. Therefore, you do not need to remove Avid|DS 4.x
to install Avid|DS 5.0.
If you uninstall Avid|DS before uninstalling the plug-ins, the
uninstall procedure will fail.