Product specifications

?
30 • Remote Processing Guide
Chapter 3 • Setting Up Remote Processing
Configuring the Remote Processing Station
You need to create a special user name/account for remote processing on the
remote processing station; it should be the account used in this setup.
Otherwise, the same drive mappings must be configured for each user name/
account on the remote processing station.
In addition, make sure that you use the same drive letters for the same shared
video storages on all remote processing stations in your workgroup.
Planning your storage areas ahead of time makes it much easier to configure
the remote processing station, and to get it started and running properly.
Deleting Default
Storages
Installing Avid|DS RP creates default video and audio storages on the remote
processing station. These default storages are not needed and should be deleted.
To delete the default storages
1. On the remote processing station, go to Start > Programs > Avid
Products > Avid|DS v5.x > Storage Utility.
The Storage Utility on the remote processing station
2. Select one of the storages and click Delete.
The following prompt is displayed.
3. Click Ye s .
4. Do the same for the other storage.