Installation guide

Limitations and Known Issues

➤ Bug Number: UDevC00122550. You cannot apply a Timewarp effect on top of a Motion

Adapter effect. If you attempt to do so, an “Effect does not apply” message appears.

However, you can promote a Motion Adapter effect to a Timewarp for full access to all

Timewarp effect parameters. For more information, see “Viewing and Adjusting Motion

Adapter Parameters” in the Help.

Panasonic

➤ Bug Number: UDevC00101216. Reveal File does not function on master clips linked from

P2 cards or virtual volumes.

➤ Bug Number: UDevC00098594, UDevC00097992. Panasonic P2 writeback is not

supported on the Macintosh platform.

➤ Bug Number: . Export to P2 limitations:

• Use Marks and Use Enabled tracks are ignored on export.

• All Audio must be PCM 16b/48K.

• All audio tracks will be exported, although P2 devices either support 2 or 4 audio tracks.

Therefore sequences should be built for delivery to the specified P2 playback device.

Sequences with 6 audio tracks will have 6 audio tracks and the P2 device will only

playback the first 2 or 4 tracks.

➤ Bug Number: . Importing P2 limitations (Macintosh):

• Importing P2 Clips in a bin is only supported with one P2 Card mounted. With two or

more P2 cards mounted, use the Media Tool, select the P2 Drives, click All Projects and

click OK. All Master Clips from the P2 cards will appear in the Media Tool. Drag them

to a bin.

• When importing from the Panasonic P2 Store device, Media Tool must be used as well

on Macintosh.

➤ Bug Number: . SD/HD Mixed sequences are not supported.

➤ Bug Number: . 1:1 MXF media cannot be exported in both SD and HD projects. Transcode

1:1 MXF before exporting.

➤ Bug Number: . (Macintosh) Hotswapping P2 cards with the editor launched is currently not

supported.

➤ Bug Number: UDevV00090107. Occasionally the File > Import P2 > Media command

does not consolidate media to the drives.