Installation guide

44
Bug Number: UDevC00097157. A clip with an unrendered TimeWarp effect might not
import to Pro Tools. Render the effect before exporting.
Bug Number: UDevC00090708. When you try to run AudioSuite you might receive the
following message, “Your computer is missing a Windows XP update required by ProTools.
Please install all available critical updates before installing Pro Tools.” If you do, you must
perform a Windows Update, Custom Install to ensure the correct .dll is installed.
Bug Number: UDevC00003573. While in Effect mode, you might not be able to scrub
through blue dot effects and have the monitor update. Move the Effect Editor so that it
overlaps some part of the Composer monitor. The monitor should now update correctly
when you scrub through blue dot effects.
Bug Number: UDEV00225614. Safe Color limits might be exceeded in SD downconverted
output from an HD project. In an HD project, if you use the Safe Color Limiter effect to
ensure safe colors in a sequence and then output that sequence using SD downconvert, some
transient pixel values might exceed your safe color ranges. This is a consequence of the
resizing process performed in the Avid Nitris or Adrenaline hardware during an SD
downconvert.
Workaround: Change the project type to an SD type before you output or render the
sequence.
Bug Number: UDEV00219374. In 30i or 1080i60 projects, Timewarp effects that use the
Film With 2:3 Pulldown Input format might not render correctly. Some frames might remain
unrendered or it might not be possible to complete the render. This problem is known to
occur in the specific circumstances described below, but might also occur in other
circumstances.
Partial Render. The problem might occur if you perform a partial render of a Timewarp
effect using the Film With 2:3 Pulldown Input format, then render the remaining part of the
segment. Some frames might remain unrendered or the second part of the segment might not
render.
Division of rendered segment. The problem might occur if you render an entire Timewarp
effect using the Film With 2:3 Pulldown Input format, and then divide the segment (for
example, by performing an overwrite edit of new material into the middle of the segment).
Some frames in the second part of the divided segment might become unrendered.
Trimming head frame of rendered segment. The problem might occur if you render an entire
Timewarp effect using the Film With 2:3 Pulldown Input format, and then trim the head
frame of the segment. Some frames in the segment might become unrendered.