Installation guide

42
➤ Bug Number: UDEV00138162. The Digital Cut tool does not allow certain durations of
black to be added to the tail of a sequence. Certain values (including 20 minutes, 30 minutes,
60 minutes, and so on) reset the clock to zero when applied. If the value you entered resets to
zero when applied, adjust the value upward or downward until a satisfactory length is
determined (at which point the clock does not reset itself and the desired duration is
correctly applied).
Dynamic Relink
➤ Bug Number: 103557. Any MPEG2 352_30I MXF media created with an x.8.1 or x.8.3
editing application will not relink in Exact match in versions x.8.4 of the editing applications
or the Media Composer 3.0 or Symphony 3.0 or NewsCutter 7.0 versions of the editing
application. The MPEG2 352_30I MXF media created with an x.8.1 or x.8.3 was
compressed at 15MB instead of 2MB and therefore will not relink in Exact match.
Workaround: Change the Dynamic Relink settings to use the “Most compressed” option
or change the “If no match is found” option to “Relink to Closest.”
➤ Bug Number: UDEV00225796. When working with HDV projects, HDV resolutions are
not available for Dynamic Relink.
Workaround: Choose “Use Closest Media” instead of “Relink to Offline” when in HDV
projects and “Specific Resolution” is selected as the Relink Method. If you do not choose
“Use Closest Media,” captured clips appear as offline when Dynamic Relink is enabled.
➤ Bug Number: UDEV00221144. If you want to re-create title media at a target format other
than the working format, you must change the project format to that designated for the
target. Otherwise only the working format resolutions are available.
Effects
➤ Bug Number: UDevC00118276. You might experience dropped frames on the initial
playback of a sequence containing a Pan and Scan effect.
Workaround: Set the Image Interpolation option in the Render Settings to Standard
(Bilinear).
➤ Bug Number: UDevC00112035. You might receive a bus error when exporting a sequence
in a 24p NTSC project that contains a scratch removal effect. Render the sequence first.
➤ Bug Number: UDevC00117131. Currently, you cannot preview Multi channel audio clips
with AudioSuite Dynamic 3 plug-in effects. The plug-ins work in the Timeline.