Installation guide

Limitations and Known Issues
37
Compatibility
➤ Bug Number: UDevC00129804. The list of available transcode resolutions in the Transfer
Settings list is not accurate. Some of the resolutions listed might be incompatible with the
current project’s media resolutions.
➤ Bug Number: UDevC00125617. Ancillary Data and Nitris DX: Due to software DNx
codec performance requirements, you must have a dual quad core system in order to capture
DNxHD 220 or 220x with ancillary data on the Nitris DX platform. If your system does not
meet the system requirements, the only way to capture DNxHD 220 or 220x is to make sure
that ancillary data is not enabled.
To switch the ancillary data feature on and off:
1. 1. Select Tools > Console.
2. 2. Type the following command: Embeddnxcc
OR
In the Media Creation Settings Capture tab, deselect Ancillary Data Enabled.
➤ Bug Number: UDevC00121033. Playing back EVS media on a Symphony Nitris (classic)
is not supported. Playback is supported for Symphony Nitris DX.
➤ Bug Number: UDevC00110632. (Windows) If you are running a Digidesign audio device,
such as the Mbox 2, with the editing application and that device appears to be inactive:
Perform the following:
1. Quit the editing application.
2. Run the Digidesign Audio Drivers Installer Program in the Avid Utilities folder.
3. Reboot the system.
4. If the audio device is still inactive, access C:\Program
Files\Digidesign\Drivers\DigiDriver.exe and select “Install.”
For Windows Vista 64, the location is C:\Program
Files(x86)\Digidesign\Drivers\DigiDriver.exe.
➤ Bug Number: UDevC00100881. You cannot connect to a Sony e-VTR device when using
e-VTR manager on a Microsoft Windows Vista32 or Windows Vista64 systems. The Sony
e-VTR logging application does not support Vista.