Installation guide

Limitations and Known Issues
33
Avid Unity
➤ Bug Number: UDevCC00080420. Avid Unity MediaNetwork and Power User login: If you
log into your Windows system as a Power User and use the same login in the Connection
Manager to log onto Avid Unity MediaNetwork, you cannot play media.
Workaround: In order to use an Avid editing application in Interplay you must log in as a
Power User. However, do not use the same login when you use the Connection Manager to
log onto Avid Unity MediaNetwork. Use a different login for the Connection Manager. This
problem does not exist on Avid Unity ISIS.
➤ Bug Number: UDevC00089671. Workspace names in Asian characters might appear
truncated at the end in any drive-selection list.
Workaround: Use no more than 5 characters for workspace names.
➤ Bug Number: UDEVC00089275. Changing Users on MediaNetwork Fibre attached
clients: When you change users on a fibre attached client, do not use the Switch User
function in the Windows Log Off dialog box. When you log back in as the original user you
may get the following errors when you play media: “Exception: FILE_OTHER, filename…
Exception: SYS_ERROR, status:1317, msg:The specified user does not exist.”
Workaround: To fix the problem once it occurs, reboot the system. To avoid the problem,
before you switch users, log off completely and reboot the system.
Capture
➤ Bug Number: UDevC00126440. A/V passthrough sync is not guaranteed while capturing
HDV material through FireWire devices. The captured media is in sync.
➤ Bug Number: UDevC00117699. When performing captures over FireWire with the
SonyZ7U or Canon XH-G1 camera, you might receive “Lack of progress” errors.
➤ Bug Number: UDevC00094480. If you have problems with batch capture accuracy for
footage captured over 1394 due to undetected small timecode breaks, select the “Enable
detection of small timecode break” option located in the Capture Settings DV& HDV tab.
➤ Bug Number: UDevC00116442. A 1:1 10-bit capture might fail with
DIG_VDM_OVERRUN or video overrun errors. This might not occur if storage
performance is optimized.
➤ Bug Number: UDevC00080115. (Macintosh) You might receive a “Mac Error - 37” error
when accessing a target drive or workspace with 28 or more characters.