Installation guide

Windows systems with Avid Adrenaline, Avid Mojo, and Avid Mojo SDI input/output

hardware can use the Digi 002 as an external audio device. This means you can use the

Digi 002 to play, record, and output audio. This option is not available for systems with Avid

Nitris DX and Avid Mojo DX hardware.

The following table compares the external fader controllers and mixers.

For more information on using these external fader controllers or mixers, see “Recording

Automation Gain or Automation Pan Information” in the Help.

Setting up the NVIDIA Card

To set up the NVIDIA card, you must make sure you have the correct display driver version,

install the display driver if necessary, and set the correct display settings. This version of the

editing application requires the following:

Feature

Digi 002

(Windows

only) Command|8

FaderMaster

Pro MCS-3000X

Yamaha 01V/96 and

Yamaha 01V

Control surface for

transport controls and

other functions

Yes Yes No No No

Provides audio play,

input, and output

Yes No No No No

Record automation gain Yes Yes Yes Yes Yes

Record automation pan Yes Yes No No No

Flying faders Yes Yes No Yes Yes

Touch-sensitive faders Yes Yes No Yes No

Solo/mute Yes Yes Yes Yes Yes

a. For Yamaha fader/controllers, solo works only if you do not use the unit for audio mixing at the same time.

Supports audio mixing No

b. The Digi 002 can be used as a standalone audio mixer but not at the same time as it is being used as an automation gain

or automation pan controller or control surface.

No No No Yes

Latch mode (also

known as Snap mode)

Yes Yes No Yes No

Number of steps of

fader accuracy

1024 1024 128 1024 256