Installation guide

24
Audio Device Supported Configurations
The following table provides the list of supported Pro Tools v8.0 audio devices that you can
use for input/output operations with Avid Media Composer v3.5.2 and higher (MC) and
Avid NewsCutter v7.5.2 and higher (NC). It also lists devices used as control surfaces.
• Supported — Indicates that you can use the audio device for input and output operations
with your Avid editing application. Some audio devices might not support all
input/output functionality.
• Supported (1394 only) — Indicates that you can use the audio device for input and
output operations only when you select 1394 in your Avid editing application. For
information on using the DNA/1394 button, see “Selecting a DV Device” in the Help.
• Not supported — Indicates that you cannot use the audio device for input/output
operations with the Avid editing system.
n
The Command|8 is also supported as a control surface for Avid Symphony.
Mbox 2
Micro (USB)
Co-install Co-install Co-install Not Tested Co-install Not tested
Digi 002
(1394)
b
Co-install Co-install Co-install Co-install Co-install Co-install
Digi 003
(1394)
a
Co-install Co-install Co-install Co-install Co-install Co-install
Pro Tools
HD, in CPU
Co-install Co-install Co-install Co-install Co-install Co-install
Pro Tools
HD, with
chassis
Not Tested Not Tested Not Tested Not Tested Not Tested Not Tested
Fast Track
Pro (USB)
Co-install Not Supported Not Supported Not Supported Not Supported Not Supported
a. Applies to 002 and 003 Rack and Console units, and 003 Rack +. When used with Mojo, Mojo SDI, or Adrenaline,
connect the 002 or 003 to an approved 1394 HBA card.
Pro Tools
(Interface)
MC Software
Only
MC with
Mojo
MC with
Mojo SDI
MC with
Adrenaline
MC with
Mojo DX
MC with
Nitris DX