Product specifications

Reinstalling the Hardware Drivers
Installation & Administration Guide • 31
12. Click Next again to start the installation.
13. When the installation is complete, click Finish to close the wizard.
14. In the Controller Properties dialog box, click Close.
Reinstalling the Avid
Equinox Break-Out-Box
Driver
The Avid Equinox Break-Out-Box (BOB) is an I/O device that converts the
serial digital video signals used by the HD and SD video equipment and the
20-bit wide data stream used by the Avid Equinox PCI card.
It is not necessary to remove the older version of the Avid Equinox BOB driver
before installing the current version.
To install the Avid Equinox BOB driver
1. Right-click on My Computer and choose Manage.
The Computer Management window is displayed.
2. Using the tree (left), select Device Manager and open Sound, video and
game controllers.
3. Right-click on Avid Equinox Break-Out-Box and choose Properties.
The Avid Equinox Break-Out-Box Properties dialog box is displayed.
4. Select the Driver tab and click Update Driver.
The Update Device Driver Wizard is displayed.
5. Click Next.
The Install Hardware Device Drivers dialog box is displayed.