User guide

Chapter 6: EuControl 54
Preferences
Footswitch
You can connect a footswitch to S3 for hands-free punch in/out. Connect a footswtich to the 1/4-inch footswitch input on the back
panel.
To configure the Footswitch in EuControl:
 In the Footswitch section of the Preferences tab, click to select the desired Punch In and Punch Out assignments:
Record | Record
When the application is rolling, pressing the footswitch once punches into recording on record enabled tracks. Pressing the
footswitch again takes the track(s) out of record but does not stop the transport.
Record | Play
Pressing the footswitch once punches into recording on record enabled tracks. Pressing the footswitch again stops the record pass
(your DAW may or may not automatically take the track out of record on stop; see the documentation for your application).
Status
Shows whether the footswitch state is currently on or off.
Shift + Fader Sets Level to 0dB
When enabled, holding SHIFT and touching a fader sets the fader to 0dB. Surface SHIFT-lock does not apply (Surface SHIFT
must be pressed).
Artist Control Display
This feature does not apply to S3.
Display Screen Dim Time
This feature does not apply to S3.
Preferences tab