User guide

Chapter 6: EuControl 53
Select by Touch
This command lets supported workstations attention (focus) tracks on-screen when their fader is touched on the S3.
Auto-bank to Selected Track
When this is selected, S3 banks to tracks when the tracks are selected on-screen. The surface will auto-bank such that the selected
track appears on the leftmost fader of the surface as long as the selected track is not currently visible on the surface.
Display Track Numbers on Surface
When this is selected, S3 shows track numbers as assigned by the current workstation (if supported) in the channel displays.
Solo Mode
These setting let you configure S3 for the following Solo modes as (if) available in the current workstation:
• Solo-in-Place
• After-Fader Listen (AFL)
• Pre-Fader Listen (PFL)
See the documentation for your specific workstation for details on Solo modes.
Wheel Sensitivity
These options are not applicable for S3.