User guide

Chapter 4: Using S3 with Pro Tools 34
Using Channel Control
To work with track Groups using Channel Control:
1 Select a track, and make sure it is attentioned.
2 From the Channel Control top-level Knob Set, press the Channel Control Encoder under the display showing Groups. The
Channel Control displays show the available Groups.
3 To add the track to a Group, press the Channel Control Encoder under the display showing the desired Group so the correspond-
ing Encoder
In switch is lit.
• To remove the track, press the Channel Control Encoder so the
In switch is unlit.
4 To enable a Group, press any unlit Channel Control Encoder Sel switch so that it is lit.
• To suspend a Group, press any lit Channel Encoder
Sel switch.
5 To edit another track’s Group properties without returning to the top-level Channel Control Knob Set, just select the channel.
If the top-level Channel Control Knob Set is not shown, press the Back Channel Control Navigation switch until it is shown.
Inserts
1
Kick
Input Dyn
EQ Sends Pan Groups Mix