User guide

Chapter 4: Using S3 with Pro Tools 30
Using Channel Control
To assign track input or track output using Channel Control:
1 Select a track. If several tracks are selected, make sure the track you want to adjust is attentioned.
2 Make sure the top-level Channel Control Knob Set is displayed. Press the Back Channel Control Navigation switch until it is
displayed.
3 Do either of the following:
• To assign track input, press the Channel Control Encoder under the display showing
Input.
• To assign track output, press the Channel Control Encoder under the display showing
Mix.
The leftmost display shows the current input or output assignment for the attentioned track.
4 Press the Channel Control Encoder under the leftmost display. The first three channel displays show the available types of input
sources or output destinations for the attentioned track.
5 Press the Channel Encoder under the display showing the desired input type.
6 If you select no input/no output, the corresponding Channel Control Encoder In switch lights.
7 If you select interface/output or bus, available hardware inputs or internal busses are displayed in the Channel Control displays.
Press the
< Page and/or Page > switches to navigate to other input choices, if available.
8 To assign a track input, press the Channel Control Encoder under the corresponding display. The Channel Control Encoder In
switch lights when that input is assigned.
9 To assign a track output, do one of the following:
• To assign an output pair, press the Channel Encoder
In switch under the display showing the desired output pair.
• To assign a mono output, press the Channel Encoder under the display showing the desired output pair to access the individual
output channels, then press the corresponding Channel Encoder
In switch to assign the mono output.
10 To exit input or output Assign mode, press Back until the top-level Channel Control Knob Set is shown.
Channel Control top-level Knob Set
Leftmost Channel Control display showing current input assignment for the attentioned track
Channel Controls displays showing available input types
Inserts
1
Kick
Input Dyn
EQ Sends Pan Groups Mix
no input
1
Kick
no input
no inputno input
1
Kick
interface
bus