Specifications

Chapter 4: HD I/O Configuration 23
Digital Page
The Digital page of the Hardware Setup dialog
lets you set the Input Format and Sample Rate
Conversion for any Digital I/O cards installed in
HD I/O.
If you have only a single Digital I/O card in-
stalled, a single Digital tab is available. If you
have two HD I/O Digital Expansion cards in-
stalled, the tabs Digital 1–8 and Digital 9–16 are
available. The Digital (one Digital card), or the
Digital 1–8 and Digital 9–16 (two Digital cards)
pages all provide the same controls for the cor-
responding physical inputs on the HD I/O Digi-
tal card. If no HD I/O Digital Expansion card is
installed, these tabs are not available.
Digital Format
Select from the following digital formats for the
HD I/O Digital card. Depending on the sample
rate, different Digital Format options are avail-
able.
HD I/O Hardware Setup, Digital page
At session sample rates above 48 kHz, sam-
ple rate conversion for the TDIF and Optical
(ADAT) inputs on the HD I/O Digital card
is automatically enabled on all eight inputs
of the selected format—unless you are using
Optical (ADAT S/MUX).
HD I/O Hardware Setup, Digital Format options at
44.1 kHz
HD I/O Hardware Setup, Digital Format options at
96 kHz
HD I/O Hardware Setup, Digital Format options at
192 kHz