User guide

Chapter 4: Eleven Rack Live Setup 35
Using an Amp Onstage
In some cases, having an amplifier onstage can
be handy for monitoring or tone reasons. Eleven
Rack makes it easy to feed your signal to both a
PA mixer and an amp.
Connecting Eleven Rack to a
Guitar Amplifier
The Output To Amp outputs on Eleven Rack can
be connected to one or more guitar amplifiers
using standard 1/4” TS cables.
• If using a single, mono amplifier, use the Out-
put To Amp 1 (L) output.
• If using two amplifiers, or an amp with stereo
inputs, connect each Output To Amp output
to a separate amp or channel input.
Sending the Correct Signal
Eleven Rack lets you choose the point in the sig-
nal path that feeds each Output To Amp jack. If
you’re using an amplifier with a distinct tone of
its own, you may want to send it a signal with
little processing (for example, only the effects)
so the sound of the amp can ring through
clearly.
Figure 6. Eleven Rack connected to the PA mixer and an onstage amplifier
PA Mixer
Before you power on Eleven Rack, make sure
any connected amplifiers or mixer channels
are turned off or muted.