User guide

Chapter 3: Exploring Rigs 29
Depth Sets the amount of delay. The higher the
setting, the more “jet-engine” artifacts will be
introduced.
Fdback Sets the amount of signal fed back into
the modulated delay. Higher settings introduce
more ringing, whistling artifacts.
C1 Chorus/Vibrato
Based on a heavyweight late-70s analog cho-
rus/vibrato pedal, CI Chorus/Vibrato offers
warm, liquid modulation effects. In Chorus
mode, the signal is routed through a modulated
short delay, which is mixed with the dry signal,
creating a washy, doubled sound.
In Vibrato mode, the dry signal is absent and
there is more control over the depth of pitch
modulation, allowing for everything from an
understated “wobble” to wacky, synth-like pitch
modulation.
Chorus Sets the intensity and speed of the Cho-
rus effect, only when the Chorus/Vibrato switch
is set to Chorus.
Depth Sets the depth of the Vibrato effect, only
when the Chorus/Vibrato switch is set to Vi-
brato.
Rate Controls the Vibrato rate, only when the
Chorus/Vibrato switch is set to on.
Chorus/Vibrato Toggles the effect between Cho-
rus and Vibrato.
Vibe Phaser
The psychedelic-era phaser that inspired our
Vibe Phaser effect was traditionally paired with
an expression pedal that could be used to vary
the rate of pitch modulation over time. Like the
C1, you can choose to run it as a Chorus, with
the modulated and dry signals mixed together,
or in Vibrato mode, which leaves the pitch-
modulated signal alone, with rippling, disori-
enting effects.
Chorus/Vibrato Toggles the dry signal on (Cho-
rus) and off (Vibrato).
When set to CHORUS, the Rate and Depth
controls are inactive. Likewise, when set to
VIBRATO, the Chorus control will not
function.