User guide

Eleven Rack User Guide16
Page Indicator
In Eleven Rack’s editing screens, a Page indica-
tor appears on the display if there is more than
one page of controls. The Page indicator shows
the number of pages, as well as the name of the
page you’re viewing. Turn the Scroll wheel to
switch between pages.
Rig Device and Utility
Settings in Rig View
This section describes the functions of the de-
vice and utility settings pages found in Rig View.
If the device or setting you select in Rig View has
additional controls, pressing SW1 (labeled
CONTROLS) takes you to a special Control page
for that device. When you’re finished, press
Edit/Back to go back to Rig View.
Amplifier, Cabinet, and
Microphone
AMP
Turn the lit Control knob to select the type of
simulated amp you want to use. Press CONTROLS
to access additional amp settings.
CAB
Turn the lit Control knobs to select the type of
cabinet and microphone you want to use. Press
SW1 to bypass the cab and mic simulations.
Press SW2 to toggle the microphone position on
or off-axis.
Effects
VOL
Press CONTROLS to access a Control page where
you can adjust the position and minimum vol-
ume of the Volume pedal, using the lit Control
knobs.
WAH
Turn the lit Control knob to select the type of
Wah pedal you want to use. Press CONTROLS to
access a Control page, where you can adjust the
position of the Wah pedal.
DIST
Turn the lit Control knob to select the type of
Distortion effect you want to use. Press CON-
TROLS to access additional settings for the cho-
sen Distortion effect.
MOD
Turn the lit Control knob to select the type of
Modulation effect you want to use. Press CON-
TROLS to access additional settings for the cho-
sen Modulation effect.
FX1 and FX2
The FX1 and FX2 pages let you choose two addi-
tional effects not found in the other categories
(such as compressor or graphic EQ) as well as a
variety of modulation effects, using the lit Con-
trol knob. Press CONTROLS to access additional
settings for the chosen effect.
Page indicator, showing page two of four
For more details on working in Control
pages, see “Control Pages” on page 19.
When playing Eleven Rack through a guitar
amp, it is recommended that you bypass the
Cab and Mic simulations. Unless the guitar
amplifier has a very flat frequency response,
its own speakers will affect the tone and
make Cab and Mic simulation unneccessary.