Credit Card Machine User Manual

34
➤ Performing an Add Edit on a promoted Advanced Keyframe Picture-in-Picture effect might
cause a “DataPointOneError”.
Workaround: Instead of first promoting to 3D, then Advanced Keyframe, promote in the
reverse order.
➤ You might see a “FluidMotion Vector Edit Requires Full Resolution” error if you work in
FluidMotion
™
Vector Edit mode in anything other than full resolution (green mode in the
Timeline). Render FluidMotion effects before you combine them with any other effects,
especially any other time-based effects.
➤ (Progressive projects only) If a clip contains any of the following effects, you must render
the effects before you apply Scratch Removal:
• Timewarp effects
• Any effect that has been promoted to the Advanced Keyframe model
➤ Removing or undoing some timewarp effects might cause audio and video to lose sync.
➤ In the Transition Corner Display mode, two of the six frames display incorrect frames during
trim operations initiated from the Timeline.
Workaround: Trim using the Trim buttons.
➤ The Fluid film 2:3 timewarp effect might render incorrectly when you are rendering fluid
motion type. The effect might flash a crop of left and right edges.
Workaround: Set the left and right mask in the FluidMotion Editor to zero.
➤ (HD only) Any animated alpha matte over 35 seconds long might fail.
➤ When an Avid effect is applied in an SD 24p progressive project, it can create unwanted
aliasing on the resulting clip.
Effects (Pan & Zoom)
You might encounter the following limitations when you use the Pan & Zoom effect:
➤ If you run out of memory when using Pan & Zoom, resize the images to a lower resolution
using an application such as PhotoShop.
➤ (Macintosh) After the link to a Pan & Zoom effect is broken and you want to reestablish it,
the application doesn’t prompt you for the source image name in the Open dialog box.