Credit Card Machine User Manual

➤ When working in 3D Advanced keyframes, occasionally, keyframe points might not display

in the path.

Workaround: Click the Enlarge or Reduce button located below the Effect Preview

Monitor.

➤ In a 1080i59 project, effects that invert or resize the image might appear field-reversed

during play in an SD timeline.

Workaround: Transcode the media to SD.

➤ A clip with an unrendered TimeWarp effect might not import to ProTools. Render the effect

before exporting.

➤ If you try to run AudioSuite and receive the following message, “Your computer is missing a

Windows XP update required by ProTools. Please install all available critical updates before

installing ProTools” you must perform a Windows Update, Custom Install to ensure the

correct dll is installed.

➤ While in Effect mode, you might not be able to scrub through blue dot effects and have the

monitor update. Move the Effect Editor so that it overlaps some part of the Composer

monitor. The monitor should now update correctly when you scrub through blue dot effects.

➤ Currently, AAF cannot conform Pan and Scan correctly. Output an AFE.

➤ Safe Color limits might be exceeded in SD downconverted output from an HD project. In an

HD project, if you use the Safe Color Limiter effect to ensure safe colors in a sequence and

then output that sequence using SD downconvert, some transient pixel values might exceed

your safe color ranges. This is a consequence of the resizing process performed in the Avid

Nitris or Adrenaline hardware during an SD downconvert.

Workaround: Change the project type to an SD type before you output or render the

sequence.

➤ In 30i or 1080i60 projects, Timewarp effects that use the Film With 2:3 Pulldown Input

format might not render correctly. Some frames might remain unrendered or it might not be

possible to complete the render. This problem is known to occur in the specific

circumstances described below, but might also occur in other circumstances.

Partial Render. The problem might occur if you perform a partial render of a Timewarp

effect using the Film With 2:3 Pulldown Input format, then render the remaining part of the

segment. Some frames might remain unrendered or the second part of the segment might not

render.